article·2010-01-01Open access

Finite element simulation of influence of lining's material on temperature field of friction pair in hydro-viscous drive

Hou You-fu

Open full text

Abstract

Combining heat conduction model and boundary conditions of steel disk,a theory model of transient temperature field was established.And the modified formula for heat flux was deduced.Then the temperature field of the steel disk which belongs to copper-based friction pair and paper-based friction pair,was solved in ANSYS.The results show that the distribution law of surface temperature of the two steel disks is almost same.The surface temperature increases with the radius,while the highest temperature doesn't appear at outer radius,for there existing convection heat transfer between outer radius and working oil.Under the same condition,the surface temperature of the steel disk belonging to the paper-based friction pair is much higher.The deformation of the steel disk is approximately a linear relationship with the radius,and larger deformation appears in the steel disk belonging to the paper-based friction pair.Finally,the selection principle of the friction lining's material is given.The experimental results are the same as that of numerical simulation.Therefore,research results can provide an important guidance to the design of the friction pair and the selection of the friction lining's material in hydro-viscous drive.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Gear and Bearing Dynamics Analysis · Tribology and Lubrication Engineering · Iterative Learning Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.