Study on debinding process of Ti-Mo getter matertial by powder injection molding
Source abstract
Abstract
Ti-Mo alloy powder was fabricated for the getter by metal powder injection molding technique.The effects of debinding process on sample quality,microstructure and component properties were investigated.The effects of different solvent,temperature and time in chemical debinding process on debinding rate were discussed.The optimal debinding solvent was trichloroethylene.The degreasing rate was 71.55%after dipping in the trichloroethylene for 6hat 50℃.According to DTA/TG curves,thermal debinding technology was optimized,debinding technology parameters of powder injection molding were confirmed that the heating rate was separately 10,5and 2℃/min under periods of 25to 120℃,120to 230℃,and 230to 500℃;And then the temperature was kept 500℃for 60min;at last sintering process was executed at the temperature of 800℃.TiMo getter devices made by powder injection molding technique exhibited the excellent properties.Characteristics sorption rate and capacity were S10=738.5mL/s and Q120=995.6Pa·mL,respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Injection Molding Process and Properties · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.