Corrosion resistance and hemocompatibility of zirconium oxide thin films prepared by sol-gel dip coating method
Source abstract
Abstract
Zirconia(ZrO2)thin films were prepared on 316 Lstainless steel by sol-gel method.And thin films were dried by grading drying procedure and annealed at 500 ℃.The phase structure of gelatum powder was characterized by X-ray diffraction(XRD).The effect of vertical lifting speed on the surface morphology of ZrO2 thin films was traced by scanning electron microscopy(SEM).Potentiodynamic polarization curves of samples were measured in phosphate buffered saline(PBS),then the corrosion resistance was contrasted synthetically.Based on the contact angles,hydrophilic and hydrophobic properties of ZrO2 thin films were evaluated,then the surface energy of ZrO2 thin films and the interface tension between thin films and blood component were calculated.The results showed that,the ZrO2 thin films annealed at 500℃had crystallized to tetragonal structure,and it can be achieved to prepare symmetrical and dense ZrO2 nano thin films with lifting speed at 7cm/min,and it had favorable corrosion resistance and hemocompatibility.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Dendrimers and Hyperbranched Polymers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.