article·2006-01-01Open access

Friction properties of PVA hydrogel against stainless steel ball

Ruyin Ma

Open full text

Abstract

The effects of different variable factors on the friction coefficient of poly(vinyl alcohol)(PVA) hydrogel and stainless steel ball counterpart were investigated by ball-pan friction and wear tester.Factors included lubrication condition,sliding speed,diameter of stainless steel ball,and load.It is shown that the free water in PVA hydrogel has a good lubrication on the friction counterpart.The friction coefficients have little difference between dry and lubricants lubrication condition at initial friction test.With the friction test time prolonged,friction coefficient of PVA hydrogel under dry condition increased sharply at short time.Friction coefficient decreased with the increasing sliding speed and diameter of stainless steel ball.It reduced 54.24%,while the sliding speed enhancing from 45r/min to 225r/min.It increased with an increase in load.The rising rate of friction coefficient at low load region is obviously larger than that at high load region.The effect of free water in PVA hydrogel on the friction coefficient gradually enhanced with the increasing load.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogels: synthesis, properties, applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.