article·2007-01-01Open access

Preparation of nano-grain YSZ coating YDC composite solid electrolyte

Li Miao

Open full text

Abstract

YSZ coating YDC composite solid electrolyte with nano-grains was prepared in this paper.First,nanosizes yttria doped ceria powders with good dispersity were successfully synthesized by co-precipitation process,using analytically pure Ce(NO3)3·6H2O and Y(NO3)3·6H2O as raw materials.Then YSZ coating YDC composite nanopowders prepared by sol-gel technique in alcohol-aqueous solutions,using analytically pure ZrOCl2·8H2O,Y(NO3)3·6H2O and YDC powders as raw materials.XRD,TEM and IR results show that YDC powders calcined at 600℃ is single fluorite phase,and its grain size is about 15nm,and successfully prepare YSZ coating YDC composite nanopowders,when reaction temperature at 75℃,the powder with better coating and dispersity.With nanosized coated powders synthesized,YSZ coating YDC composite solid electrolyte was prepared by pressureless sintering at different temperatures for 2h soaking time.The experimental results showed that relative density of sintered samples increased obviously from 52% to above 95% during sintering at 800 to 1350℃ for the same dwelling time of 2h.And the relative density of the sample sintered from room temperature rise to 1300℃ and then fast fall to 1250℃ for 2h could reach above 95% and its average crystallite size was about 100nm.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.