Studies on the adsorption performance of chitosan for persistent organic contaminants
Source abstract
Abstract
Chitin was immersed in 50% sodium hydroxide water solution at 110℃ reacting intermittently for 3h,washed to neutral by distilled water and dried at 60℃.Chitosan with a deacetylation ratio higher than 95% was obtained.Dissolved 1g chitosan in 100ml 1% acetic acid solution,the velocity of the solution was 100mPa·s at 25℃.The effects of adsorptive conditions on the adsorptive properties of chitosan were studied.The result shows that the adsorption is rapid in weak acid solution and that the adsorption reaches an equilibrium status 3h later.At room-temperature and pH 4,the saturated adsorptive capacities of chitosan for different contaminants are listed as follows: Acid Red B 442mg/g,acid light yellow G 419mg/g,SDBS 345mg/g,R salt 98mg/g.As an environment-friendly material,chitosan can be easily prepared and has many advantages such as rapid adsorption and high adsorptive capacity on water-soluble organic contaminants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanocomposite Films for Food Packaging · Water Quality Monitoring and Analysis · Adsorption and biosorption for pollutant removal
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.