article·2015-01-01Open access

Tribological behavior of PEEK and nano-SiO_2 reinforced PTFE composites

Yang Dong-y

Open full text

Abstract

PEEK and nano-Si O2 particles synergetic filled PTFE composites were prepared by mechanical blending-molding-sintering method. The tribological behavior of composites with different volume fraction of fillers was tested on different test conditions by a MRH-3 block-on-ring friction and wear tester. The transfer film on counterpart GCr15 ring was inspected and anslyzed with scanning electronic microscopy( SEM). The results demonstrated that the lowest friction coefficient was gained when the PTFE composite was filled with only 5% PEEK. The special wear rate of 10% PEEK / PTFE were decreased clearly with filled different contents of nano-Si O2 particles. The special wear rate of the sample with 5%nano-Si O2 and 10% PEEK had the lowest volume wear rete. The load and sliding speed effect significantly on the tribological behavior of nano-Si O2/ PEEK / PTFE composites,but the effect of environmental temperature on the friction coefficient and wear rate of the composite is not obvious.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.