article·2013-01-01Open access

Preparation and properties of superhydrophobic SBR-SiO_2 coatings

Demin Jia

Open full text

Abstract

The superhydrophobic SBR-SiO2 coatings were prepared by particle filling process,in which the precipitated silica was modified with hydroxyl silicone oil(HSO),and SBR was reasonably cross-linked with dicumyl peroxide(DCP).Effects of the contents of HSO,SiO2 and DCP as well as the cross-linking conditions on the film forming property and wettability of the coatings were investigated.The variation of superhydrophobic properties of the coatings after hot air aging and ultraviolet(UV) aging were discussed.The results showed that the coating had good appearance without any cracking and water contact angle of the coating reached 157.0° when HSO/SiO2mass ratio was 1∶1,HSO-SiO2 content was 3.5g,DCP content was 0.25g,the cross-linking temperature was 155℃,and the cross-linking time was 20min.The coatings have good hot air aging and ultraviolet(UV) aging resistances in superhydrophobic property.The micro-nano hierarchical rough morphology observed by scanning electron microscopy(SEM) in combination with the low surface energy of HSO render the coating surface good superhydrophobic property.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.