Operation gas (argon) pressure dependence of the performances of ZAO thin films deposited by magnetron sputtering
Source abstract
Abstract
ZAO (ZnO∶Al) transparent conductive thin films have been prepared by middlefrequency alternative magnetron sputtering with ZnO ceramic target mixed with Al2O3 of 2%wt. Argon gas pressure during deposition was in the range 0.2~8.0Pa. The influences of operation gas pressure (argon gas pressure: PAr) on the structural, optical and electrical performances of ZAO films have been studied. The visible transmittance, carrier concentration and Hall mobility were investigated by UVvis and van der pauw, respectively, while microstructure has been charactered by Xray diffraction (XRD). Atomic force microscope (AFM) was used for investigation of the morphology of obtained films. The results show argon gas pressure was a dominant factor for variable structural, optical and electrical performances of the ZAO thin films. The lowest resistivity obtained in this study was 4.6×10-4 Ω·cm for the film with average visible (490~600nm) transmittance of 90.0% and sheet resistance of 32 Ω, which was deposited at 250℃ and 0.8Pa.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.