article·2014-01-01Open access

A study of metallization for PZT piezoelectric buzzer using magnetron sputtering technology

He Me

Open full text

Abstract

We proposed a novel metallization process for PZT piezoelectric buzzers using direct-current(DC)magnetron sputtering method,and compared it to the traditional screen-printed method Three groups of samples with different sputtering processes were investigated,namely Cr/Cu/Ag,Ti/Cu/Ag and Cu/Ag multilayer structures.The micro-structure of surface and cross-section view of metallized films were analyzed by scanning electron microscopy(SEM),other aspects,such as adhesion and electric characteristics were also investigated.Results show that the performance of films prepared by magnetron sputtering method has surpassed those by screen-printed method in all aspects.The proposed method provides more dense,uniform,and conformal films than the traditional one,and the Ti/Cu/Ag structure shows the best performance owing to the matching of materials between Ti glue layer and PZT substrate.The largest tensile strength reaches 13.5MPa,and the mean resonant resistance and electromechanical coupling coefficient are 25Ωand 0.7,respectively,which are better than those of screen-printed ones.Additionally,the thickness of metallized film of magnetron sputtering is only about 1.7micron that is much less than the screen-printed one.Due to the good performance,low-cost as well as non-pollution,the magnetron sputtering show promising applications in piezoelectric buzzer and other PZT based devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Acoustic Wave Resonator Technologies · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.