Morphological features and adsorption for phenol of P(MMA-BA) hollow microspheres prepared by spray drying
Source abstract
Abstract
Hollow poly(methyl methacrylate-butyl acrylate) microspheres with shells of nanoparticles were fabricated by the combination of seed emulsion polymerization and spray drying method.The formation mechanism of the microspheres was analyzed,as well as the influences of prepolymer content,monomer ratio m(MMA)∶m(BA),crosslinking agent content on morphological features and specific surface area.The results revealed that hollow microspheres with regular shape were fabricated when the condition as follows:emulsion concentration of 2%,inlet temperature at 125℃,outlet temperature at 50℃,feed rate of 250mL/h,prepolymer amount of 2wt%,monomer ratio m(MMA)∶m(BA) around 7∶3,crosslinking agent amount of 10wt%-20wt%.In addition,the phenol adsorption properties of hollow microspheres were discussed.The results show that adsorptive capacity in low microspheres concentrations was up to 7.8568mg/g.Especially,the adsorptive capacity improved with the increase of monomer ratio and specific surface area.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adsorption, diffusion, and thermodynamic properties of materials · Aerogels and thermal insulation · Advanced Polymer Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.