Effect of different pretreatment for ABS resin surface on electroless copperplating
Source abstract
Abstract
The ABS resin surface was pretreated by polishing agent,alkaline liquor or corona discharge technology in this study.Then 6-(3-(triethoxysilyl)propyl)amino-1,3,5-triazine-2,4-dithiol monosodium(TES)was used to fabricate self-assembled film on different pretreated ABS resin surface.The electroless copperplating was conducted on these pretreated ABS resin plates.The wettability of the ABS surface after pretreatment was evaluated by contact angle,and the morphologies of the ABS surface after electroless copperplating are studied by SEM.The adhesion properties between different pretreated ABS substrates and copperplating are tested by ruling method.The results indicated that the ABS surface pretreated by corona discharge had good wettability compared with polishing agent and alkaline liquor pretreatment,and the contact angle was 46.3°.The SEM images suggested that the porous morphology appeared on the corona treated ABS surface,and the surface roughness increased.The copperplating on ABS surface pretreated by corona discharge was uniform and denser,and the copper particle was smaller.The adhesion property between the corona treated ABS substrate and copperplating was greatly improved.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Recycling and Waste Management Techniques · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.