article·2001-01-01Open access

The effects of processing procedures on GMR of Cu-Co alloys

Sun Zhan

Open full text

Abstract

The microstructures of Cu Co alloys after melt spinning and annealing are investigated by means of metallography and TEM analysis. Experimental results reveal that for melt spun Cu 80 Co 20 alloy, Co rich phase forms during melt spinning. While Co content exceeds 25wt%, liquid separation takes place. In 15wt%~30wt%Co Cu alloys, the spherical precipitation of Co rich may appear not only on the boundaries but inside the Cu rich grains during annealing. GMR of melt spun Cu Co alloys are studied under the different conditions of heat treatment. The results reveal that the variation rate of GMR with magnetic field increases with annealing temperature and annealing time increment, which can result in the higher GMR appearing at low applied field. GMR of melt spun Cu Co alloys reaches the minimum during a certain time at a fixed annealing temperature because of growing of Co rich phase and forming of a new modulation structure. When annealing processes very sufficiently, Cu Co alloys can be magnetized to saturation at 1.0T.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties and Applications · Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.