article·2011-01-01Open access

Preparation of the modified resin by cationic surfactants and treatment of steel rolling emulsified oily wastewater

Ding Li-ling

Open full text

Abstract

Modification of strongly acidic styrene type cation exchange resin(001×7) by cetytrimethyl-ammonium bromide and its oil and turbidity removal performances from real steel rolling oily wastewater were investigated.The orthogonal experiment was used to optimize the modification process.At the same time,the original and modified resin was characterized by FT-IR,TG and SEM.The results showed that the best modification process parameters included mass ratio between resin and CTAB(4∶1),temperature(60℃),reaction time(5h) and reaction solvent(secondary distilled water).The grafting quantity reached 0.17mmol/g at the best modified process.Proofs of CTAB successful grafting to resin included the characteristic adsorption peak from modified resin at 1487.69cm-1 that was brought out by bending and deforming vibration of C—H bond from quaternary ammonium group,lower weigh loss rate of R-CTAB than that of R-H before 250℃,breakdown and void from R-CTAB that were answerable to heat stability reduce.Compared with R-H,the oil and turbidly removal rate of R-CTAB were all above 98%,which increased by 31.7% and 8.0% respectively.Fatherly,the higher removal rate could keep constant at operation period.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chemical Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.