The effect of coarsening process on the properties of electroless nickel plating on the surface of lead zirconate titanate ceramic
Source abstract
Abstract
The coarsening process,as the one link in the pretreatment of electroless nickel plating,was extremely vital to the electroless nickel plating process.In order to identify the suitable coarsening way for the lead zirconate titanate(PZT)ceramics,the effect of the roughening process on the deposition performance was studied.In this paper,the PZT ceramics were used as substrate,subjected to rough by five coarsening methods.Ultimately,the nickel deposition on the surface of the PZT ceramics was obtained from alkaline electroless nickel plating solutions at low temperature.A direct comparison between the five types of rough solutions was presented by the analysis of coating appearance test(integrity,uniform,brightness),adhesion force,deposition rate,the corrosion resistance,scanning electron microscopy(SEM)and X-ray diffraction technique(XRD),and the most effective coarsening way for electroless nickel plating on the surface of the PZT ceramics was determined:30%of the mass fraction of sodium hydroxide,30 min of roughening time,30℃of roughening temperature,and the concentration of ethylene diamine was 30mL/L.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Chalcogenide Semiconductor Thin Films · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.