article·2011-01-01Open access

Effect of injection processes on the magnetic properties of high magnetic powders loading PPS/NdFeB bonded magnets

Linna Li

Open full text

Abstract

Currently,the preparation of high loading PPS/NdFeB injection magnet is the focus of research.In this article,PPS/NdFeB bonded magnet and permanent device in practical use with magnetic powder loading being about 90wt% were prepared successfully,tested by DSC,SEM and magnetizing curve tester in order to be characterized with microstructure and magnetic performances,and analyzed on processes parameters to the laws and reasons.The results showed that while injection temperature,velocity and pressure is respectively 305℃,90%υmax and 153MPa,bonded magnet(10mm×10mm) can obtain 5.12 g/cm3 of density,and the magnetic performances(BH)max,Br,Hci) can reach to 47.1kJ/m3,0.53T,647.3kA/m respectively.After being magnetized for 24 poles,surface magnetic field intensity of bonded permanent device(diameter Ф20mm and innerФ18mm) can achieve 145.06mT.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties of Alloys · Electric Motor Design and Analysis · Superconducting Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.