Dielectric properties of high-k zirconium oxide films prepared by reactive RF magnetron sputtering method
Source abstract
Abstract
High-k Zirconium oxide films were prepared by reactive RF magnetron sputtering method, by adjusting the gas flux ratio O_2/Ar in forming gas when whole gas volume was fixed. The influences of O_2/Ar flux ratios on the film morphology and surface roughness were investigated by transmission electron microscopy and atomic force microscopy, respectively, and the electrical properties of ZrO_2/SiO_2 dielectric stacks were measured with capacitance-voltage measurement using Al gate capacitors. The results show that the morphology of ZrO_2 films was affected by O_2/Ar flux ratios, the morphology of ZrO_2 deposited in O_2 atmosphere was characterized by nanometer microcrystalline and monoclinic structure (a=5.17,b=5.26,c=5.3,α=γ=90°,β=80.17°), and the homogeneous and amorphous ZrO_2 film can be deposited in mixing atmosphere (O_2/Ar=1∶4); ZrO_2 films with small RMS (root-mean-square) and smooth surface morphology are obtained in low O_2/Ar flux ratios; ZrO_2 film characterized by the dielectric constant of 25 wre made in a suitable O_2/Ar flux ratio (O_2/Ar=1∶4).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Copper Interconnects and Reliability · Acoustic Wave Resonator Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.