Effects of dolomite additive on bauxite-based fracturing proppant:phase composition,microstructure,performance
Source abstract
Abstract
High-strength fracturing proppant was prepared from bauxite(67wt% Al2O3) and dolomite.The micro-mechanism related with the strength improvement was addressed with systematic sintering experiments as well as phase composition/microstructure characterization.The results indicate that the addition of dolomite promotes the formation of liquid phase during sintering process.Liquid phase of samples plays three rules during sintering process:(1) depressing the sintering temperature;(2) facilitating the growth of rod-like mullite;(3) filling pores/bonding particles.Analyses suggest that the mechanical strength enhancement was introduced by the appearance of the interlocked rod-like mullite and the cross-linkage of particles by the liquid phase.The best performance of our proppant was achieved by 3wt% dolomite addition;the proppant exhibits a breakage ratio of less than 6%(69MPa) with a 1290-1400℃ sintering process,and this breakage ratio was depressed down to 2.9% with a sintering temperature of 1350 ℃.The bulk density and apparent density of the 1350℃ sintered proppant are 1.75 and 3.12g/cm3,respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Geotechnical and Geomechanical Engineering · Granular flow and fluidized beds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.