Review on compressive deformation of bulk metallic glasses
Source abstract
Abstract
In this paper,the compressive deformation behavior,samples surfaces and fracture microstructure characteristics have been reviewed at different temperatures and strain rates for bulk metallic glasses( BMGs). BMGs behave like inhomogeneous brittle fracture,non-Newtonian fluid and Newtonian fluid mode respectively at reduced compressing temperature t r= T / T g ranging of 77 K / T g≤t r t rc1,t rc1≤t r t rc2and t rc2≤t r T x/ T g. When strain rate was about 10- 4s- 1,normally t rc1= 0. 839-0. 920 and t r c2= 1. 011. With the strain rate decreasing,the critical reduced compressive temperatures t rc1( changing from inhomogeneous brittle fracture mode to non-Newtonian fluid one) and t rc2( from non-Newtonian fluid one to Newtonian fluid one) were decreased. At low t r,plasticity of BMGs increased with the number of shear bands,which were obvious on the samples surfaces,but at high t r they were even unobserved because of homogeneous deformation and heat. With t r increasing,fracture microstructure characteristics changed from complex and inhomogeneous vein-like pattern to homogeneous one,then to droplets,or lava-flow pattern. In addition,Ni60Pd20P17B3BMG and Ti40Zr25Ni3Cu12Be20BMG behaved like non-Newtonian fluid mode during compressing at t r= 0. 127-0. 503. Finally,this paper also discussed the phenomenon of nanocrystallization during the compression deformation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.