Ultra-precision machining of LBO crystal
Source abstract
Abstract
The whole ultra-precision machining of LBO crystal is circumstantiated including lapping and polishing process.The surface finish was examined acceptable by using a nikon optical microscope.When polishing damage was no longer visible,the surface roughness was determined using atomic force microscope.The flatness of LBO crystal was tested by using Wkyo RTI 4100 laser interferometer.The process of ultra-precision machining of LBO crystal contains lapping,mechanical polishing and chemical mechanical polishing.Firstly,SiC abrasives with continually decreasing size were adopted in rough lapping and Al2O3 abrasives in precision lapping process.Secondly,CeO2 abrasives were utilized for mechanical polishing to raise machining efficiency and get a good surface flatness.Thirdly,colloidal SiO2 slurry was selected as the polishing agent of chemical mechanical polishing process to get a better surface roughness and higher surface quality.A LBO crystal surface of high precision and high quality with surface flatness less than λ/10(λ=633nm),surface roughness less than 0.2nm RMS and very few micro scratches or damages,is obtained.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced Measurement and Metrology Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.