article·2010-01-01Open access

Preparation of ultra-lightweight ceramic from sewage sludge and fly ash used for fillers

Xi Fei

Open full text

Abstract

The purpose of this study was using dehydratedsewage sludge,fly ash and clay to prepare lightweight ceramics for fillers.The Ultra-lightweight sludge-fly ash ceramics(ULSFC) were experimentally produced with various mass ratios of sludge,clay and fly ash,and then the suitable mass ratios and the suitable process were determined.The optimum conditions(additions of clay,sludge and fly ash,preheating temperature and time,sintering temperature and time) which used for fillers were selected by orthogonal experiment L18(37).Properties(physical properties,microstructure and toxic metal leaching) were tested at last.The results shows that the ULSFC used for fillers are light(bulk density is 365.50kg/m3,and grain density is 1047.78kg/m3),high hydroscopic(water absorption is 49.46%),nontoxic(contents of toxic metal leaching test are all below the detection limit) and porous(more pores than the commercial lightweight ceramics).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.