Study on surface alloying of the self-nanocrystallizated electric iron
Source abstract
Abstract
The electric iron was surface nanocrystallizated by high energy shot peening(HESP) method.Ni and Cr were well mixed to the shot tank to accomplish them diffusion into the electric iron and the surface self-nanocrystallization of the electric iron at the same time.The microstructure and the corrosion properties of the self-nanocrystallizated layer and alloying layer of the electric iron were investigated by microscopy,scanning electron microscopy(SEM),X-ray diffraction(XRD) and electrochemical measurement system.Experimental results showed that under a 0.6MPa shot pressure and 6min shot time,a self-nanocrystallizated layer with an average grain size of 47.9nm and a 0.0431% microstrain is obtained on the electric iron by HESP.Because of large number of grain boundaries and imperfects in the self-nanocrystallizated layer,which lead to increase of activity and decrease of corrosion properties of the self-nanocrystallizated layer.The corrosion potential of the Ni alloying layer is-0.548V while the Cr alloying layer is Ecorr=-0.514V,which are all larger than that of the electric iron.That means the corrosion properties of the electric iron are enhanced after alloying treatment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Diamond and Carbon-based Materials Research · Nonlinear Optical Materials Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.