Diffusion ability of hydrogen in Mg-Ni alloy electrode with different compositions and microstructures
Source abstract
Abstract
In this study,MgxNi(x=1,1.5,2,in atom percent) alloy powders with different microstructures were prepared by using mechanical ball milling method.The effect of Mg/Ni ratio on the microstructure evolution of the alloys during ball milling was investigated by X-ray diffraction(XRD) and scanning electronic microscope(SEM) observation.The cyclic voltammetry curves of the Mg-Ni alloy electrodes with the different compositions and microstructure were measured under the different potential scan rates,and the hydrogen diffusion coefficients in these electrodes were calculated.The results show that lowering Mg/Ni ratio can promote the glass forming ability of Mg-Ni alloys during ball milling,and the complete amorphous structure can be obtained after ball-milled for 120 and 160h for MgNi and Mg1.5Ni alloys,respectively.Hydrogen exhibits high diffusion ability in the electrode made by the fine and disperse MgNi alloy powders in the complete amorphous strcuture.The hydrogen diffusion coefficient was 1.98×10-8 cm2/s in it.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen Storage and Materials · Magnesium Alloys: Properties and Applications · Ammonia Synthesis and Nitrogen Reduction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.