Chemical silver plating on the copper alloy wires for high density optical pickup
Source abstract
Abstract
Copper alloy wires with silver coating were prepared by chemical liquid plating.In this study,the effect of coating composition,main salt concentration and reaction time on the property of suspension wire were investigated.It was found that the resistivity of suspension wire firstly decreases and thereafter increases with the increase of silver nitrate,glucose concentration.The thickness of silver increases and the resistivity decrease with increasing plating time.When the concentration of silver nitrate is about 30g/L,the concentration of glucose is about 40g/L and the reaction time is 20min,the thickness of silver gets 1.3μm and the resistivity of sample reaches to 7.0×10-6(Ω·cm).The conductivity has got about 20 percent increase compared with the sample without silver plating.The morphology,thickness,composition were characterized by Physics properties measurement system(PPMS,Quantum Design)and field emission-scanning electron microscope(FE-SEM).The results show that the coating composition is pure silver without oxide.The binding force between the silver coating and the substrate is perfect and there are no defects such as crack,stripping,and so on.The suspension wires obtained from this method is suitable for the application at the optical actuator for high density optical storage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Copper Interconnects and Reliability · Semiconductor Lasers and Optical Devices · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.