article·2012-01-01Open access

Preparation of porous ceramic suspension and modification of positively charged

Liao Run-hua

Open full text

Abstract

Industrial waste fly ash was used as the main raw material to prepare a suspended ceramic granule which has a specific density close to water(0.80-1.10g/cm3)and good wear resistance.In addition,heterogeneous condensation,repeatedly suspended ceramic coating method modified positively charged surface,and adsorption properties of modified ceramic,iron load,bulk density,apparent porosity,compressive strength,modification of surface morphology,surface electrical and phase composition of coatings were characterized by analysis.The best modification conditions were determined by methylene blue adsorption experiments as follows: 1mol/L of ferric chloride,calcination temperature 650 ℃,roasting time 3 h.Prepared under this condition,the modified ceramic removal rate of 86.3% methylene blue,is 3-4 times that of unmodified ceramic.The test showed that the modified ceramic granule was covered with a layer of iron oxide with uneven thickness.The main phase of iron oxide layer was α-Fe2O3 which exhibited porous structures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Recycling and utilization of industrial and municipal waste in materials production · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.