article·2015-01-01Open access

Preparation and testing of composite piezoelectric-triboelectric film based on BaTiO_3/MWCNT

Zhenyin Hai

Open full text

Abstract

The composite piezoelectric-triboelectric films were prepared by using the inverting mold process and polarized.The PDMS mixture,incorporated with BaTiO3 nanoparticles and MWCNTs,was uniformly coated on the surface of the silicon mold with an array of pyramid micro-structures and heated before the film was made.SEM and Raman spectroscopy were used to observe and analyze the surface and internal structures of the film and its components.Testing system for vibration energy harvesting was designed to measure and analyze output voltage of the film and its power supply capacity.The results showed that the array of pyramid structures on the surface of the piezoelectric-triboelectric film had a high degree of consistency.A small BaTiO3/MWCNT content was relatively evenly distributed in the film and BaTiO3 nanoparticles were the tetragonal phase.The peak to peak value of output voltage generated by the piezoelectric-triboelectric film was even higher than the sum of the peak to peak values of output voltages generated by the piezoelectric and triboelectric films.The vibration energy harvester made of the piezoelectric-triboelectric film with an area of approximately5×10-4 m2 was capable of lighting up at least one commercial LED.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.