A composite pore-forming technology for the preparation of the ultra-low-density block porous gold
Source abstract
Abstract
In this paper,aluminium microspheres were used as templates,and the Al/Au compound microspheres with core-shell structure were prepared by electroless gold plating.Then alloying happened between the gold player and the surface of the base aluminium powders during the spark plasma sintering(SPS) process.So block precursor with Al/Al-Au alloy core-shell structure was fabricated.Finally,block porous gold was got after the aluminium templates were etched with a two-step route,while the dealloying of the Al-Au alloy player happened in the same time.Emphasis was placed on optimizing the technical parameters of electroless gold plating,so as well the variation of the phases and constituents in the process of sintering and corrosion.All of these process were characterized by XRD,SEM and EDS.It was found that the activation and reductant had great effects on the result of the electroless plating.The block porous gold prepared in this way had two-stage holes: nano holes(80-120nm) and micron holes(1-10μm),which also had uniform microstructure with a density as low as 0.39g/cm3 and a porosity of 98%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanoporous metals and alloys · Electrodeposition and Electroless Coatings · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.