article·2013-01-01Open access

Study on the SMC molding technology and absorbing properties of new-type absorbing composite

Huo Jia

Open full text

Abstract

The absorbing composite panels with excellent properties were prepared successfully using E-51 epoxy resin as matrix and Fe78Si13B9 amorphous powder as absorbing agent.In addition,the molding technology and performance index were studied systematically.The results showed that the absorbing composite panel presented regular layer structures and the content of absorbing agent in every layer was distributed evenly.Meanwhile,the composite had good mechanical properties with the tensile strength 128.03MPa and bending strength 253.04MPa.Furthermore,the absorbing properties with different mass ratios of absorbing agent and epoxy resin were measured by vector network analyzer.It was shown that the reflection peaks shift gradually towards the low frequency.When the mass ratio of absorbing agent and epoxy resin was 6∶1,the absorbing properties demonstrate excellent in a large wide frequency range from 2.7 to 18GHz with the reflection values less than-4dB,which provides a valuable reference for the next absorbing compositions design.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Electromagnetic Scattering and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.