article·2012-01-01Open access

Study of planarization efficiency of an alkaline copper slurry on 300mm pattern wafer CMP

Guanlong Cao

Open full text

Abstract

Due to the incorporation of Cu/Low-k for copper interconnects fabrication,the Cu chemical mechanical planarization(CMP) is necessary to be performed at a reduced down pressure.In this paper,we have developed an inhibitor free alkaline copper slurry,the dissolution rate results indicate that the slurry has a low etch rate on copper(2nm/min),the polish results reveal that the copper removal rate can be achieved at 633.3nm/min under a low down pressure of 10.34kPa.The planarization efficiency results show that the slurry has a high planarization capability,it can eliminate about 794.6nm step height.Atomic force microscope(AFM) test show that the copper polished by this slurry has a lower roughness(0.178nm).All the results above show that the slurry can be applied in multi-layers copper CMP.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Copper Interconnects and Reliability · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.