Investigation on the mechanical lapping and polishing of CdZnTe wafers
Source abstract
Abstract
In this paper,the mechanical lapping and polishing processes of cadmium zinc telluride(CZT) wafers were investigated.Adopting the Al2O3 powder with different diameter,the CZT wafers were mechanical lapped and polished,considering the parameters of lapping pressure,lapping plate rotation,and duration times.Then the surface quality,roughness,lapping and polishing rate were investigated by means of metallographic microscope,atomic force microscope and micrometer measurement.The results showed that,with the 2.5μm diameter Al2O3 powder,the optimal lapping pressure and plate rotation speed were 120g/cm2 and 75 r/min respectively,and lapping rate was 1μm/min.Under the mechanical polishing with 0.5μm Al2O3 suspension,the optimal concentration of Al2O3 suspension was 6.5wt% with the polishing rate of 0.28 μm/min.The AFM measurement showed that,after lapping,the roughness Ra value of CZT wafers was 13.83nm,then after polishing for 4h the Ra value decreased to 4.22nm.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Semiconductor Detectors and Materials · Advanced Surface Polishing Techniques · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.