article·2010-01-01Open access

Influences of substituting La with Pr on structures and electrochemical cycle stability of La-Mg-Ni-based A_2B_7-type electrode alloys

Xinlin Wang

Open full text

Abstract

In order to improve the electrochemical cycle stability of the La-Mg-Ni system A2B7-type electrode alloys,La in the alloy is partially substituted by Pr and the melt-spinning technology was used for preparing La0.75-xPrxMg0.25Ni3.2Co0.2Al0.1(x=0,0.1,0.2,0.3,0.4) electrode alloys.The microstructures of the as-cast and spun alloys were analyzed by XRD,SEM and TEM.The electrochemical cycle stability of the alloys was measured.Influences of substituting La with Pr on structures and electrochemical cycle stability of the alloys were investigated systemically,and the mechanism of lose efficacy of the alloy electrodes was researched.The results obtained show that the as-cast and spun alloys have a multiphase structure which consists of two main phases(La,Mg)Ni3 and LaNi5 as well as a residual phase LaNi2.The substitution of Pr for La leads to an obvious increase of the(La,Mg)Ni3 phase and a decrease of the LaNi5 phase in the alloys.The results of the electrochemical measurement indicate that the cycle stability of the alloy monotonously rises with increasing Pr content.The radical reasons of which cause lose efficacy of the alloy electrodes are that the surface of the alloy electrodes is severely corroded by electrolyte and that the alloy electrodes are pulverized in process of the electrochemical charge-discharge cycle.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen Storage and Materials · Metallurgical and Alloy Processes · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.