Porous poly caprolactone 3-D scaffolds by ScCO_2 induced phase separation
Source abstract
Abstract
3-D porous scaffolds has an important role in tissue engineering.Supercritical CO2(ScCO2) induced phase separation method was employed to produce porous poly caprolactone(PCL) 3-D scaffold,and the effects of process parameters on pore size and structure were also investigated.A self-designed experiment system was set up.Four solution concentrations(15%,20%,25% and 30wt%),three CO2 pressures(10,12 and 14MPa),and three temperatures(35,40 and 45℃) were examined using the system.The morphologies of the scaffolds were examined by scanning electronic microscope.Pore distribution and pore size of the scaffolds were measured using image-pro-polus software.Porous PCL 3-D scaffolds with pore size range of 40-80μm were obtained.The results indicated that the pore size decreased as the solution concentration increased;while it also decreased as the temperature decreased.However,the change of CO2 pressure had no significant effect on pore size.The results were also explained qualitatively in terms of the thermodynamics calculations using ScCO2-AC-PCL ternary system.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer Foaming and Composites · Phase Equilibria and Thermodynamics · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.