Evolution of microstructure during sequential motion compaction process for large demensions porous 7090Al/SiCp composite
Source abstract
Abstract
On the basis of the conception that a large deformation could be obtained through the accumulation of many times of small deformation, the distribution of SiC particles and the deformation of the pores during the sequential motion compaction of the large dimension spray co-deposited 7090Al/SiCp composite were investigated. Wedge pressing resulted in the local deformation, which led to the shear deformation and the closure of pores. Ultimately the pores were eliminated and the densification was realized. The SiC particles rotated under the pressing force and exhibited an order distribution with the long axis perpendicular to the pressing direction. When thickness reduction is about 40%, the ultimate tensile strength and yield strength of the composite are 250 and 175MPa, respectively, and the elongation is 3.8%, the relative density is 91.76%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.