article·2008-01-01Open access

Preparation and characteristics of anode-supported solid oxide fuel cells by wet ceramic powder process

Huang Xi-qiang

Open full text

Abstract

A low-cost and high-efficiency technique,namely,wet ceramic powder process in combination with co-firing,is developed to fabricate anode-supported solid oxide fuel cells(SOFCs).The reduction characteristics of porous anode substrates,the microstructure of the supported YSZ electrolyte films and the electrochemical properties of the SOFCs are tested and discussed.With moist hydrogen as fuel,the cell exhibits the maximum power densities of 1.11,0.6,0.49,0.34,0.18 and 0.09W/cm2 at 800,750,700,650 and 600℃,respectively.With moist methane as fuel,the maximum power densities are 0.62,0.40,0.25,0.14 and 0.05W/cm2 at 800,750,700,650 and 600℃,respectively.The impedance testing results indicate that the cell performances are limited by the electrode polarization while the ohmic loss across the YSZ electrolyte film is negligible.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.