article·2010-01-01Open access

Effect of modified CoCrMo alloy surface roughness on the friction and wear properties of ultra-high molecular weight polyethylene

Nan Huang

Open full text

Abstract

CoCrMo alloy was modified by high frequency and low voltage plasma immersion and ion implantation (HLPIII) nitriding at different parameters. Wear test was carried out on reciprocating wear test machine in 25% of fetal calf serum solution to study the effect of modified CoCrMo alloy surface roughness on the friction and wear properties of Ultra-high molecular weight polyethylene (UHMWPE). The results revealed that the main wear mechanism of UHMWPE was adhesive wear for lower modified CoCrMo alloy surface roughness(Ra=0.0176μm). And abrasive wear was dominated for higher modified CoCrMo alloy surface roughness (Ra=0.1529μm). In both cases,UHMWPE wear rates were relatively high. However,when modified CoCrMo alloy Ra was 0.1145μm,UHMWPE wear debris may be transferred to the friction surface,and this effectively weaken the role of rough cutting peaks. And it has the lowest wear rate of UHMWPE for modified CoCrMo alloy with 0.1145μm surface roughness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Tribology and Wear Analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.