Preparation of amorphous alloy atomization process numerical simulation and the formulation of process parameters by bar plasma spray
Source abstract
Abstract
In accordance with past achievement in one-dimensional stable fluid dynamic by flame spray,an atomization mechanism was provided in preparation of amorphous coating by bar material plasma spraying.It is found that the measured particle median diameter agree well with those obtained by numerical simulation.It shows that the mechanism of atomization is feasible by bar material plasma spaying.Two main process parameters are optimized to produce ferrous amorphous coating;the parameters includes primary gas pressure and secondary gas pressure.The results show that it can be obtained amorphous coating with 3mm crystal bar Fe80P13C7 and Fe72Cr8P13C7.The spray coating process parameters are as follows: spraying electric voltage of 55V,spraying electric current of 600A,distance between nozzle and bar of 4mm,bar velocity of 50mm/min,spraying distance of 100mm,spraying angle about of 90°,primary gas pressure of 0.85MPa and secondary gas pressure of 0.32MPa.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Laser-induced spectroscopy and plasma
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.