article·2011-01-01Open access

Preparation and electrical conductivity of Cu-30wt%Ag composite nanopowders

Shi Gui-mei

Open full text

Abstract

Cu-30wt%Ag composite nanopowders were prepared by a both gas and liquid phase stabilizing method in H2+He,and conductive paste was prepared using composite nanopowders as conductive phase.The structure,morphology,surface layer and oxidation resistance as well as electrical conductivity of the nanoparticles were studied using X-ray diffraction(XRD),high-resolution transmission electron microscopy(HRTEM),infrared spectrum analysis,chemical analysis,gas analysis,differential thermal and thermogravimetry analysis.The results show that the nanoparticle size ranged from 10 to 60nm.The surface of nanoparticles are consisted of bi-layer including a 2-(2-butoxyethoxy) ethyl acetate molecules(C10H20O4) layer and a oxide layer,the bi-layer prevents the particles from a further oxidation in air.The 2-(2-butoxyethoxy)ethyl acetate molecules of nanoparticles surface are desorption at about 200℃ in air.At the temperature below 200℃,the oxidation resistance of the composite nanoparticles are prepared by a both gas and liquid phase stabilizing method is better than that of gas phase stabilizing method.The Cu-30wt%Ag composite nanopowders conductive paste sintered at 200℃ for 50min under 5Pa can be obtained a thick film with resistivity is(1.56-3.92)×10-4Ω·cm.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Electronic Packaging and Soldering Technologies · Fluid Dynamics and Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.