Electrodeposition of La-Ni Alloy from Ethanol Solvent
Source abstract
Abstract
La-Ni alloy coating was obtained from ethanol solvent. NiCl2 and LaCl3 were used as main salts and (NH4 )3C6H5O7 was used as complex. The effects of concentrations of main salts, temperature and current density on La content in the coating were investigated. Using this technology, a bright, homogeneous and good adhesive coating is obtained. La content is 15. 2wt%. And it's found that the covering power is up to 95% and the current efficiency is about 70%. By XPS, XRD, SEM and energy spectrum, the results show that most of lanthanum in the coating is in the form of LaH2, a little is oxide and the rest is metal lanthanum and nickel in the coating is in metal state. La-Ni alloy coating is amorphous. From the measurement of the curves of cyclic voltammetry, the mechanism of La and Ni alloy codeposition is coincident with the induced codeposition.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.