article·2013-01-01Open access

Preparation of high Nb-TiAl alloy by gelcasting method

Lin Ta

Open full text

Abstract

High Nb-TiAl alloys were prepared by gelcasting method and sintering in argon atmosphere from Ti-45Al-8.5Nb-0. 2B-0. 2W-0. 1Y spherical prealloyed powder and mixed element powders Ti+45% Al+10% Nb( at%). The results show that the slurry of spherical prealloyed powder has better rheological properties,and the solid loading of former slurry was up to 70 vol%. The dried bodies using the non-aqueous system gelcasting were sintered at 1480℃ for 2 hours in argon atmosphere. The relative density of sample with solid loading at 70 vol% from prealloyed powder reaches to 99.1%,much higher than relative density 85. 5% of the mixed element powder( solid loading at 50 vol%). The microstructure of the sintered high Nb containing TiAl was analyzed by using electronic microscopy( SEM) and X-ray diffraction( XRD). The results show the sample from prealloyed power consists mainly of γ-TiAl and β-Ti2Al; the element power was mainly composed of γ-TiAl and a small amount of α and β with fine lamellar microstructure. After the prealloyed powders were gelcasting and sintered at 1480℃ for 2 hours,high Nb-TiAl alloys with high density and fine microstructure could be obtained and with the compressive strength of 1715MPa and the relative compressive ratio of 1. 85%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.