Removal of formaldehyde from aqueous solutions using TiO_2 immobilized on bamboo activated carbon
Source abstract
Abstract
A composite of TiO2 and bamboo activated carbon was achieved through sol-gel method and its removal of formaldehyde was evaluated.Removal rate of formaldehyde with different pre-adsorbing time,initial concentrations and different catalyst dosages over the composite was investigated.It was shown that the prepared composite photocatalyst remove formaldehyde from aqueous solution distinctly: when the dosage is 1.0g,800mL initial concentration of 5mg/L aqueous solution of formaldehyde,after 1h pre-adsorbing and then exposure in 17W UV-light,the formaldehyde removal rate is up to 95.96% at 480min.The kinetic analysis showed that photocatalytic rates were well described by the Langmuir-Hinshelwood model.The apparent first-order reaction coefficient of photocatalysis with low concentration is higher than that with high concentration formaldehyde.More composite showed higher reaction coefficient than the less one in certain extent,and too much composite hindered the photocatalysis owing to the lower light transmittance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Water Quality Monitoring and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.