article·2012-01-01Open access

Investigation of the preparation of MoS_2 coating on the surface of cemented carbide by sol-gel method

Baoliang Li

Open full text

Abstract

On the basis of MoS2 soft coating on the surface of cemented carbide was successfully obtained by citric acid sol-gel method,influence of added amount of MoS2 in the coating on surface microscopic morphology and friction coefficient of MoS2 coating was studied by scanning electron microscope and friction test.The results indicated that,MoS2 coatings with high quality and good binding with the substrate on surface of cemented carbide samples can be prepared by sol-gel method of respectively adding 13,20,27g/L MoS2 into 1.6mol/L citrate solution and making one on the surface by burshing.The surface morphology of the MoS2 coating is of lamellar.The samples with MoS2 soft coating significantly reduces the friction coefficient from 0.6-0.8 of original sample to 0.15-0.25.But the adding amount of MoS2 in soft coating has no obvious difference in the friction coefficient.The fact that the soft coating could reduce the friction coefficient of samples could be attributed to the presence of the coating with MoS2,that has advantages of lower friction and great bearing capacity,and changed friction nature between the friction pairs materials becauce of the existence of coating.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Lubricants and Their Additives · Catalysis and Hydrodesulfurization Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.