Influence on the permeability of Fe_(73.5)Si_(13.5)B_9Cu1_Nb_(3-x)Al_x under different annealing conditions
Source abstract
Abstract
Amorphous Fe73.5Si13.5B9Cu1Nb3-xAlx ribbons were fabricated by partial substitution of Nb by Al,and were nanocrystallized under 4 different annealing conditions,the complex permeability of the samples was measured by using impedance analyzer,and the influences of annealing conditions on initial permeability were discussed.It is found that the initial permeability of the samples(except the sample x=3.0) has been improved significantly after various annealing and it becomes greater compared to conventional compositional Finemet.It is also found that for different Al content,the highest permeability depends on the annealing conditions,and for different annealing conditions,the highest permeability depends on the Al content,and for the sample x=3.0,which contains no Nb,after constant heating or cooling annealing in the furnace,the initial permeability can maintain a fairly high value.It concludes that the permeability of the samples can also be improved by partial substitution of Nb by Al after appropriate annealing.It provides a potential method for fabricating high permeability nanocrystalline alloys at less cost.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.