Optical performance of a solar dish concentrator formed by the same size mirror located on parabolic frame

Solar dish concentrator with low cost and meeting the flux distribution is always pursued for the efficient utilization of concentrated solar energy. This paper investigates the optical performance of a solar dish concentrator formed by using a number of identical square mirror units arranged on a parabolic surface frame. The manufacturing of the mirror surface of this concentrator requires only one kind of mold, which has the significant advantage of low-cost manufacturing. Three common types of mirror units including the parabolic mirror (focal length f _m), spherical mirror (radius R _m ) and plane mirror are considered. The influence of key geometric parameters including the mirror width d (250–750 mm) and dimensionless parameters such as f ₁/ D, f _m/ f ₁ and R _m/ f ₁ ( f ₁ is the focal length of parabolic frame) on its optical performance indexes such as the focused spot size (i.e., intercept width w), average local concentrator ratio (LCR), peak LCR and flux uniformity is analyzed using ray-tracing method, and the correctness of optical model and concentrator optical function is verified by outdoor concentrating experiments. The results show that the concentrator composed of parabolic or spherical mirrors can easily obtain a small circular focusing spot with high LCR and the intercept width can be easily controlled within 200 mm, the peak LCR can reach 34457 (average LCR is 12898), and average LCR reaches 14794 (peak LCR is 29497) at the smallest spot with w = 38.4 mm, which can be a low-cost alternative to parabolic dish concentrator. The concentrator with plane mirrors are easier to obtain square focusing spots with excellent flux uniformity, w can be controlled from 180 to 380 mm and uniform LCR is between 100 and 1400, which is very suitable for concentrating photovoltaic field.