article·2014-01-01Open access

Investigation on constitutive model and microstructure evolution of high purity titanium during hot deformation

Lian Li

Open full text

Abstract

Isothermal compression tests of high purity titanium were performed on a Gleeble-1500 system in the temperature range between 723 and 873 K at strain rates between 0. 001 and 1 s-1. The flow behavior was described by a hyperbolic sine constitutive equation and the microstructures of samples were observed by electron back scattering diffraction(EBSD). The results show that during hot deformation pure titanium experienced from strain hardening to steady state deformation and the corresponding softening mechanism changes from dynamic recovery to dynamic recrystallization; peak stress levels decreased with deformation temperature increasing and strain rate decreasing. High purity titanium was positive strain rate sensitive material. The flow stress σ was represented by the Zener-Hollomon parameter in an exponential equation withparameter A,α and n in expression were 1. 84 × 1024s-1,0. 013 MPa-1and 12. 66,with activation energy Q of 415. 69 k J/mol. The microstructure of specimens with different Z values show that dynamic recrystallization was responsible for softening of low Z value sample,which dynamic recovery was the main reason for dynamic softening of high Z values sample,dynamic recrystallization occurred in the sample with middle Z value. Z value can be used to justified the dynamic softening mechanism for high purity Ti material.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.