article·2008-01-01Open access

Study on electroless Ni-P plating of glass fiber

Zhang Xin-chao

Open full text

Abstract

The Ni-P alloy coating was covered on surface of glass fiber by electroless plating technology.Morphology,composition,structure and property of the Ni-P plating were characterized by scanning electron microscopy(SEM),energy diffraction spectrum(EDS),X-ray diffraction(XRD) and thermal shock test,respectively.The results showed that the Ni-P alloy coating on surface of glass fiber,which was 1-1.5μm or so in depth,was composed of 0.1-1μm grains.There was good adhesion between Ni-P plating and glass fiber.The resistivity of the plated glass fiber was 1.25×10-3Ω·cm,so it could be used as conductive filling for the preparation of conductive polymers.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.