article·2010-01-01Open access

Coaty of SnAgCu alloyed powder by Stearic acid via vacuum evaporation

Huang Guo-ji

Open full text

Abstract

Fine leadless solder alloy powder is easy to be agglomeration and oxidization,whose dispersivity and antioxidation can be improved by surface modification technique. In this paper,the raw material is SnAgCu alloy powder which is produced by the method of close-coupled gas atomization. It was used that vacuum evaporation modify SnAgCu alloy powder by coating stearic acid.The influence of the vacuum evaporation temperature and time on modification effects of SnAgCu alloy powder were studied. Scanning Electricity Microscope (SEM) and transmission electricity microscope (TEM) were used to observe the appearance and structure of coating alloy powder and X-Ray photoelectron spectroscopy(XPS) and carbon-sulfur united testing instrument were adopted to measure photoelectron energy and test C contents of the coating powder. The result indicated that the appropriate conditions of vacuum evaporation were: 70℃ for 12h and lower than 1.6×10-2Pa vacuum degree. In this condition,uniform and compact coating,whose thickness was 5-10nm,could be obtained. The growth mechanism of stearic acid coating SnAgCu alloy powder was following volmer-weber,and the coating behavior was a process of physical adsorption.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Nanomaterials and Printing Technologies · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.