Influence of calcining and sintering temperatures on microstructures and microwave properties in Bi_2O_3 and MnO_2 co-doped [(Pb,Ca) La](Fe,Nb)O_3 dielectric ceramics
Source abstract
Abstract
The impact of calcining and sintering temperatures on microstructures and microwave properties in Bi_2O_3 and MnO_2 co-doped [(Pb,Ca) La](Fe,Nb)O_3 dielectric ceramics have been researched. Bi_2O_3 and MnO_2 co-doping can effectively reduce sintering temperature by 100~140℃ as well as enhance bulk densities. All of the XRD,SEM and microwave dielectric properties can verify that 950℃ is the most proper calcining temperature for Bi_2O_3 and MnO_2 co-doped [(Pb,Ca) La](Fe,Nb)O_3 dielectric ceramics. The sintering temperature can significantly influence the grain size and porosity. With the increasing of sintering temperature, the grain size gradually increased while the porosity decreased until 1130℃. Higher sintering temperature would cause the evaporation of PbO in the system and the porosity increased again. When the ratio of Bi_2O_3/MnO_2 K=1 and co-doping content W=1wt% and sintered at 1050℃ for 4h, the microwave dielectric properties could be: e_r=91.1,Q_f=4870GHz and τ_f=1.85×10~(-6)/℃ in [(Pb_(0.5)Ca_(0.5))_(0.92)La_(0.08)](Fe_(0.5)Nb_(0.5))O_3 ceramics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.