article·2006-01-01Open access

Mechanical properties and microstructure of Al_2O_3/TiCN composite by gas pressure sintering

Haitao Yang

Open full text

Abstract

Al_2O_3-30wt% TiCN composites have been fabricated successfully by two-stage gas pressure sintering schedule.The gas pressure sintered Al_2O_3-30wt%TiCN composite achieved a relative density of 99.5%,a ben- ding strength of 772MPa,a hardness of 19.6GPa,and a fracture toughness of 5.82MPa/m~2.It is a solid state sintering of two phases without solubility forAl_2O_3-TiCN composite.Little grain growth occurred for TiCN during sintering while Al_2O_3 grains grew about 3 times.The interface microstress arising during cooling from the processing temperature because of the thermal and/or mechanical properties mismatch between the Al_2O_3 and TiCN phase is about 50MPa.Such a compressive microstress is not high enough to cause grain boundary cracking that may weaken the composite but to introduce dislocations within grains,which is very good to en- hance the composites.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.