article·2009-01-01Open access

Investigation of magnesium alloy surface composites prepared by evaporative pattern casting

Zitian Fan

Open full text

Abstract

Surface composites was fabricated by evaporative pattern casting technology,in this paper,AZ91D was choosed as the base alloy,and aluminum powder as the alloying element,alloying coating was self-made with a good property.The magnesium alloy melt was poured at 780℃,negative pressure degree at-0.02MPa,it was found that a great number of new phases were formed on the matrix,the microstructure of surface layer was examined by means of scanning electron microscopy(SEM),energy dispersive X-ray(EDX) anaylsis was used to determine the chemical composition of new phases.The thickness of composite layer increased when alloying coating varied from 0.3mm to 0.5mm,moreover,the microstructure became dense and distributed evenly.Micro-hardness and electrochemical properties test were performed,the results indicated that the micro-hardness of composite layer was up to three times of the matrix,corrosion resistance increased about 5 times compared with the matrix.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.