Sintering and electrical properties of YSZ electrolyte tubes with thin wall prepared by an improved slip casting
Source abstract
Abstract
The sintering technique was studied for the 8mol % yttria-stabilized zirconia (YSZ) electrolyte long tubes with a thin wall made by the improved slip casting. Effect of sintering processing and Al2O3 doped contents on the density of YSZ electrolyte long tubes with thin wall was analyzed, and the sintering regimes of the tubes were determined as well. The electrical properties of the YSZ electrolyte tubes were investigated. The research results showed that the sintering behavior of YSZ electrolyte thin wall tubes can be changed due to the difference in the heating rate. The arabic gum in a green body was burned out completely at the temperature of 600℃. The sintering temperature range of 1400~1550℃ is an important sintering stage, in which the porosity is reduced and the density is raised significantly in the thin wall tubes. Adding suitable amount of Al2O3 the densities of the YSZ electrolyte thin wall tubes can be enhanced. The oxygen ionic conductivity of the samples increases with increasing of the sintering density. The dense YSZ thin wall tubes with 266mm length and 0.4~0.9mm thickness have been obtained using the improved slip casting and the above sintering technique. The density of the YSZ thin wall tubes has been reached 96.7% of the theoretical density.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.